DUPLEX 420 is a medium sized all-in-one floor scrubber / washer / dryer that makes floor cleaning faster and easier than ever before. Compact size combined with outstanding manoeuvrability and great efficiency in small or large areas makes the Duplex 420 by far the most popular floor cleaner in the Duplex range. Whether it be a difficult hard floor like profiled tiles or a short pile domestic carpet, this amazing machine can clean them all. With a Duplex 420 there is basically no set up time either. Simply fill the two solution tanks with water, select your floor setting, pull back the handle and start cleaning. It really is that easy. DUPLEX 420 FEATURES: Cleans to the very edge Dual water tanks Steam penetrates deep into pores Dual conveyor belt & brush pick-up Adjustable height Fingertip control DUPLEX 420 SPECIFICATIONS Brush Length: 35 cm Theorical Treatable Surfaces: 350 m2/h ...
Product Description
A high soild content finish with metal cross-link polymers, 20 PLUS sets up a hard, durable coating which lasts for weeks and produces a bright, clear gloss even without buffing. 20 PLUS is the ideal product to provide the exclusive look and extra protection for your high visibility floors.
Area of Use
20 PLUSis ideal for vinyl surfaces and is also suitable for a wide variety of other floor types such as rubber, wood strip, parquet and other synthetic tiles. It can also be used for terrazzo, marble and granite.
Special Features
- Contains 20% solids
- Self-priming; no sealer or undercoat is required
- Cost-efficient coverage: 1st coat ~ 40m2/L, subsequent coats ~ 60m2/L or higher
- Good slip resistance
- Hard and extremely durable to detergent washing, black marks, scuffing and does not discolour white or light-coloured floors; prolongs the life of floors
Directions for Use
- Remove old coatings from floor with a good stripper such as ACTION 150 S. For uncoated floors, wash with a detergent such as POWER FORCE. Remove soiled solution with a wet/dry vacuum cleaner. Mop with clean water to remove all traces of residue.
- Allow floor to dry completely. Pour 20 PLUS into a clean bucket and using a clean mop, apply uniformly to the floor. Wait 20-30 mins for coating to dry, then apply a second coat. For new, porous or well stripped floors, a third coating recommended, again after drying. Allow last coat to dry as well before allowing traffic on floor. Do not return unused portion from bucket to container.
- Estimated coverage:
· 1st coat ~ 30 m2/L
· 2nd coat ~ 50 m2/L
· Higher coverage for further coats - To maintain finish, dust mop daily and wet mop with mild detergent regularly to remove abrasive dirt particles. To achieve even glossier finish, burnish with high speed machines and quality buffing solution such as SUN UP PLUS. When finish has dulled, strip and recoat the floor again.
Precautions
As with most chemical products, avoid ingestion and eye contact. Wash hands after use.
ADHYA GRAHA KENCANA
Komplek Multiguna Blok D6 ● Jalan Raya Serpong KM. 7 ● Tangerang 15325
sales@adhyagrahakencana.com ● www.adhyagrahakencana.com
Jabodetabek ● Bandung ● Bali ● Surabaya
Komentar
Posting Komentar