DUPLEX 420 is a medium sized all-in-one floor scrubber / washer / dryer that makes floor cleaning faster and easier than ever before. Compact size combined with outstanding manoeuvrability and great efficiency in small or large areas makes the Duplex 420 by far the most popular floor cleaner in the Duplex range. Whether it be a difficult hard floor like profiled tiles or a short pile domestic carpet, this amazing machine can clean them all. With a Duplex 420 there is basically no set up time either. Simply fill the two solution tanks with water, select your floor setting, pull back the handle and start cleaning. It really is that easy. DUPLEX 420 FEATURES: Cleans to the very edge Dual water tanks Steam penetrates deep into pores Dual conveyor belt & brush pick-up Adjustable height Fingertip control DUPLEX 420 SPECIFICATIONS Brush Length: 35 cm Theorical Treatable Surfaces: 350 m2/h ...
Product Description
KLEN 1308 is an epoxy based floor coating consisting of a hydrophilic curing agent, fillers, as well as other auxiliary agents. By using KLEN 1308, an epoxy hardener liquid, it can produce attractive floor coatings that are highly durable. With floor materials such as silicon powder, attractive surfaces can be created.
Special Features
- Superior adhesion on metal,cement,rubber and plastic.
- Extremely durable and abrasion resistant.
- Provides attractive appearance with its shiny,lasting and dust-free features.
- Ease of application.
- Tar-free and odourless finishes.
- Colourful floorings can be created by mixing KLEN 1308 colour additives.
Directions for Use
Avoid application if floor temperature is below 13 deg C or above 30 deg C. Atmospheric, floor and product liquid temperatures should always be considered before applying this product.
- This product should be applied from a roller tray and not by pouring directly onto the concrete surface. A high quality, 3/8” nap roller or lambs wool applicator should be used.
- Apply as evenly as possible. To lessen bubbling of coating, avoid excessive agitation of the liquids with the roller or applicator.
Drying Time:
Clear
+Colour Additive
Tack Free
< 8 hours
8 to 10 hours
Hard Dry
12 to 14 hours
< 24 hours
Light foot traffic - 24 hours
Heavy duty traffic- 2 to 3 days
Maximum abrasion and chemical resistance- 7 days
Above dry times are based on relative humidity above 50% and temperature of 24 deg C and above.The dry times are only approximate and will vary depending on atmospheric conditions at time of application.
Note: An increase in either temperature or humidity will shorten drying time. Please consult your KLENCO representative for full application instructions.
Komentar
Posting Komentar